CLEANTLE Inspire Ceramic Coating

1. Before use, shake the bottle for a minimum of 30 seconds. During application, particles of the component will still be visible, but shaking the preparation will prevent it from settling at the bottom of the bottle. Repeat this process before each application.

2. Prepare the surface (paint/wheels/glass/plastics/tires/other rubber elements) by removing all dirt, especially tar or metal shavings. If necessary, polish the paint to completely eliminate any imperfections. Degrease the prepared surface with IPA50% solution.

3. Apply the product in sections (e.g., 40x40cm) and cross-motions using the provided applicator for paint, glass, plastics, or a microfiber applicator for tires and rubber elements.

4. After 1-2 minutes after application, wipe the product with a microfiber cloth until all streaks are completely removed.

5. For glass and plastic elements, after 1-2 minutes, remove or wipe off any excess coating.

6. For tires, it depends on the model and age of the tires – older tires tend to "absorb" the coating, while new ones require leveling/removing excess coating after approximately 1-2 minutes.

7. Usage on a medium-sized car is approximately 20ml (for paint), 10ml (for wheels), and 20ml (for glass, plastics, and tires).

Do not let the coating dry without leveling