MINT Upkeep
SWAG Heavy Cut Compound
SWAG Heavy Cut Compound
SWAG Heavy Cut Compound
Experience the power of Swag Heavy Cut Compound! Designed for all detailers and car care enthusiasts who push limits and crave a challenge. With advanced technology and a specialized formula, this aggressive compound removes even the toughest paint imperfections. Achieve a flawless finish while minimizing heat and maximizing cutting power.
How to use?
Use in a shaded area on a cool and clean surface.
Shake before use.
Apply a few drops of SPHC to a polishing pad, e.g. Cutting*
*Select the hardness and type of pad depending on the type of correction.
Work on a work area of approximately 40 x 40 cm.
Spread an even layer over the entire fragment.
Use a polishing machine.
Optimal speed of the polishing machine
RO up to 1500 rpm.
DA according to preference.
Polish with moderate pressure until a paste is formed.
If the varnish is at a high temperature, wait until it cools down.
Degrease the surfaces with SWAG FINAL INSPECT.
If degradation is still present after inspection, repeat the process.
Additional tips:
Do not freeze.
Shake before use.
Protect from sunlight.
Store in a cool and dry place.